This standoff is used to provide separation from your mounting surface to a prop that is supported with 3/4" Schedule 40 PVC Pipe.
The standoff can be used as is to provide 1" of separation or it will fit snug inside 3/4" Schedule 40 PVC pipe that is cut to your custom length. It is countersunk to accept a #10 or #8 screw.
Note: The shaft will fit inside thin-wall 200 PSI PVC, but it will be loose. These are designed for the thicker walled, 480 PSI Schedule 40 PVC. If you would like fittings that fit snug in thin-walled 3/4" PVC, contact us and we'll print a custom order for you. The outer diameter is the same for thin-walled and Schedule 40, so the clip end of the mount works with both types.
Note: This item can be customized. Please contact us with your specifications.
3D Printed Items
This item is 3D printed using PETG. Due to the nature of 3D printing, there may be slight imperfections such as small visible lines or hair type protrusions. They do not modify the functionality in any way and add character to each piece.